5 Series E60 520i (N46T) SAL
Do not under any circumstances pull/lever safety battery
terminal (4) off by force.
Pull safety battery terminal (4) upwards and remove.
Open cable lug mounting (1).
Release screw (2).
Tightening torque 61 12 3AZ
.
Unclip and remove positive battery cable (3).
Warning!
Risk of short circuits!
During installation, make sure that
•
Cable lug mounting (1) is correctly seated on positive
battery cable (3)
•
Screw is properly connected.
Unclip positive battery cable (1) from cable guides (2) and
remove.
RA Replacing positive battery cable (from battery to luggage compartment connector)
BMW AG - TIS
27.01.2013 02:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
