5 Series E60 523i (N52) SAL
•
Unlock and disconnect plug (1) by turning.
•
Do not touch pins
•
Release cable from retainers
•
Insert special tool 24 2 390 in sealing sleeve.
These tasks are described in Notes on mechatronics.
Important!
Read and comply with important note.
Release screw (1).
Disconnect hydraulic lines (2) to transmission fluid cooler.
Installation:
Replace sealing rings.
Detach holder from transmission fluid lines on oil sump.
Crank engine at vibration damper in direction of rotation until
screw (1) is visible in opening.
Release all screws of torque converter with special tool
24 1 110 .
Crank engine further and release remaining bolts.
Tightening torque 24 40 1AZ
.
RA Removing and installing automatic transmission (6HP19Z/N52/N52K/N53)
BMW AG - TIS
27.01.2013 21:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
