5 Series E60 523i (N52) SAL
Disconnect plugs (1 and 2).
Unscrew bolt (3).
Tightening torque 25 16 5AZ
.
Slide interlock cable (4) down using a screwdriver (5) from shaft
of interlock locking pawl towards left.
Installation:
Adjust interlock cable and check interlock function.
Release screws (1).
Tightening torque: 25 16 3AZ
.
Feed sleeve (2) out of body.
Lift shift tower out of centre console.
Installation:
Seal must not be damaged.
RA Removing and installing/replacing shift tower (Steptronic)
BMW AG - TIS
27.01.2013 21:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -