5 Series E60 523i (N52) SAL
51 21 330
Removing and installing/replacing window
cavity cover strip on inner front door
Necessary preliminary tasks:
•
Remove front door trim panel
Lever out cover (1) at rear slightly.
Start at rear with removal of window cavity cover strip (2).
Pull off window cavity cover strip (1) towards top.
Replacement with Security version:
Cut window cavity cover strip (1) to length on B-pillar side to
680 mm.
Installation:
If necessary, replace faulty clips (3).
Insert window cavity cover strip (1) below cover (2).
Installation:
Coat window cavity cover strip (1) with water before fitting.
Start with installation at front.
RA Removing and installing/replacing window cavity cover strip on inner front door
BMW AG - TIS
28.01.2013 02:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
