5 Series E60 523i (N52) SAL
51 43 070
Removing and installing/replacing side trim
panel, footwell, on A-pillar, left
Necessary preliminary tasks:
•
Remove front entrance cover strip (inside)
Release door mucket (1) in area of footwell side trim panel on A-
pillar on left (2).
Unscrew bolt (3).
Remove engine hood actuator lever (4) from footwell side trim
panel on A-pillar on left (2).
Unscrew bolt (1).
Unclip footwell side trim panel on A-pillar on left (3) in direction of
arrow from retaining point (2) and remove.
Installation:
If necessary, lever out clip (1) remaining in bore.
If necessary, replace faulty clip (1).
Place footwell side trim panel on A-pillar on left (2) preinstalled
with clip (1) on associated bore and clip into place.
Replacement:
Press catches and remove switch for unlocking rear lid (3).
RA Removing and installing/replacing side trim panel, footwell, on A-pillar, left
BMW AG - TIS
28.01.2013 03:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -