5 Series E60 523i (N52) SAL
66 31 016
Removing and installing (replacing) long
range sensor (LRR sensor) (M-kit)
Special tools required:
•
00 9 317
Tape off bumper in working area (1) with yellow plastic adhesive
tape.
Lever out trim with special tool 00 9 317 and remove.
Firmly press down plastic adhesive tape (1) in working area
again.
Unclip long range sensor (2) from mounting.
Installation:
Make sure long range sensor (2) is correctly and securely seated.
Secure long range sensor (1) against falling out.
Disconnect plug connection (2) and remove long range
sensor (1).
RA Removing and installing (replacing) long range sensor (LRR sensor) (M-kit)
BMW AG - TIS
28.01.2013 10:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
