5 Series E60 523i (N52) SAL
84 11 610
Removing and installing/replacing eject box
(cordless keypad handset)
Necessary preliminary tasks:
•
If necessary, remove cordless keypad handset from eject box
•
Remove fresh-air grille in rear cabin
If necessary, disconnect antenna plug (1).
Disconnect plug connection (2).
Unlock socket housing on plug connection (2) and slide out
contact carrier.
Note:
Unlock eject box (1) and fold up.
Release screws (2).
Feed out plug connection and remove eject box (1).
Installation:
Ensure correct cable routing in eject box (1).
RA Removing and installing/replacing eject box (cordless keypad handset)
BMW AG - TIS
29.01.2013 22:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
