5 Series E60 523i (N52K) SAL
Remove retainer (1) using screwdriver and press out pin.
Detach retainer (1) with a screwdriver (2).
Note:
Do not foul carpet with brake fluid.
Detach hydraulic line from clutch master cylinder.
Remove lock (1) from pin with aid of screwdriver (2).
Lever out pin (3) with aid of screwdriver.
Remove clutch master cylinder.
Installation:
Replace pin.
Press in pin until lock (1) can be seen to snap into place.
Detach supply hose (1) from clutch master cylinder.
Important!
Do not pull supply hose completely into interior.
RA Removing and installing/replacing clutch master cylinder
BMW AG - TIS
02.02.2013 15:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
