5 Series E60 523i (N52K) SAL
32 32 050
Removing and installing/replacing lock
cylinder for steering lock (up to 09/2005)
Special tools required:
•
32 3 110
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove steering column trims
•
Remove ring antenna
Insert ignition key into lock cylinder in such a way that release
opening (arrow) remains accessible.
Turn ignition key to "R" position.
Insert special tool 32 3 110 into release opening (arrow) until
end cap (1) is released.
Slide end cap (1) to ignition key and remove with special tool
32 3 110 .
Pull out lock cylinder with end cap (1) and ignition key, turn
ignition key forward and back if necessary.
Installation:
Insert lock cylinder with end cap (1) and ignition key into steering
column.
Align end cap (1) by way of opening to steering column and
press into place.
Turn ignition key to "zero" position and remove.
RA Removing and installing/replacing lock cylinder for steering lock (up to 09/2005
BMW AG - TIS
02.02.2013 17:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
