5 Series E60 523i (N52K) SAL
32 41 341
Replacing cooler return line for power
steering
Warning!
Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Observe country-specific waste-disposal regulations
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove front underbody protection
•
M54, N52, N53: Remove intake filter housing
•
N54: Remove charge-air duct
Remove fluid reservoir from bracket.
Release hose clamp (1) and detach cooler return line (2) from
fluid reservoir.
Installation:
Make sure radiator return line is laid without tension and with
sufficient spacing to adjoining components.
RA Replacing cooler return line for power steering
BMW AG - TIS
02.02.2013 17:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
