5 Series E60 523i (N52K) SAL
Replacing shaft seal:
Withdraw shaft seal with special tool 00 5 010 .
Drive in new shaft seal with following special tools (depending on
rear differential) as far as it will go.
-
188K / 188L / 188LW: Use special tools 00 5 500 and
33 3 470
-
215K / 215L / 215LW / 215 with lock: Use special tools
00 5 500 and 33 3 440
Installing drive flange:
Coat sealing lips of shaft seal and sealing surface of drive flange
with differential oil.
Fit drive flange.
Press on drive flange with special tools 23 1 300 , 33 1 341
and 23 1 303 , if necessary 23 1 302 until collar nut can be
screwed on.
Important!
Do not under any circumstances tighten down collar nut
beyond marker points in order to avoid damaging the
clamping sleeve.
Tighten down collar nut (1) to point where marker points are
aligned.
RA Replacing shaft seal for input flange on rear differential
BMW AG - TIS
02.02.2013 18:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -