5 Series E60 523i (N52K) SAL
34 52 516
Removing and installing / replacing DSC
control unit
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Before removal, read out the control unit fault memory and if
necessary print out the diagnostic trouble code.
Installation:
When replacing the control unit, carry out the following tasks with
the DIS (Diagnosis and Information System):
-
Vehicle coding (performed by the vehicle itself)
-
Adjustment of steering angle sensor (performed by the
vehicle itself)
-
Adjustment of brake pressure sensor (performed by the
vehicle itself)
-
Adjustment of lateral acceleration sensors (performed by the
vehicle itself)
-
Function check, hydraulic unit
Unfasten plug connection (1).
Release screws (2) and carefully detach control unit (3) towards
front.
Important!
Risk of damage to the contacts when removing and installing
the hydraulic unit.
RA Removing and installing / replacing DSC control unit
BMW AG - TIS
02.02.2013 19:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
