5 Series E60 523i (N52K) SAL
Shown on build date up to 03/2004:
Release nut (1) and disconnect jointed rod.
Tightening torque 37 14 7AZ
.
Release screws (2), remove ride-height sensor from bracket and
disconnect plug connection (3).
Installation:
Sensor lever must point from ride-height sensor to right front
wheel.
Build date up to 03/04: If necessary, tie back connecting cable for
ride-height sensor.
Tightening torque 37 14 6AZ
.
After installation:
•
Check headlight adjustment, correct if necessary
RA Replacing front ride-height sensor
BMW AG - TIS
02.02.2013 19:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -