5 Series E60 523i (N52K) SAL
Installation:
-
Pretension door lock (1) with knurled screw (2) until special
tool 51 2 190 just contacts corner points (3).
Important!
To tension door lock (1), it is only permitted to turn knurled
screw (2) by a further 1 to 1.5 turns (max.) (risk of
damage).
Door lock seal must rest uniformly on inner door plate (water
ingress).
-
Tighten down door lock screws, tightening torque
51 21 1AZ
.
Installation:
Check function of child lock (1) on door lock (2).
Replacement with Soft Close Automatic:
Release nuts (1) and remove bracket (2).
Tightening torque 51 22 11AZ
.
RA Removing and installing/replacing door lock in left or right rear door
BMW AG - TIS
02.02.2013 21:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
