5 Series E60 523i (N52K) SAL
51 71 041
Removing and installing/replacing rear left or
right wheel arch cover
Necessary preliminary tasks:
•
Remove rear wheel
•
If necessary, disconnect and feed out plug connection on
brake pad sensor
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Illustration created using E60 as an example. There may be
differences in detail in the case of other vehicle models.
Release screws (1, 3 and 5).
Unscrew nuts (2).
Release expansion rivet (4).
Carefully feed out rear wheel arch cover towards bottom.
Installation:
Make sure rear wheel arch cover is correctly seated.
RA Removing and installing/replacing rear left or right wheel arch cover
BMW AG - TIS
02.02.2013 23:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -