5 Series E60 523i (N52K) SAL
Installation:
Catches (1) of wiper arm cap (2) must not be damaged.
Make sure wiper arm cap (2) is correctly seated.
Unscrew nut (1).
Installation:
Tightening torque 61 61 12AZ
.
Important!
Observe tightening specification (settling time) without fail
(risk of detaching).
Remove wiper arm (2) in direction of arrow.
Pull off adjusting disk (1) with special tool
61 6 060 .
Installation:
Replace adjusting disk (1).
Mount adjusting disk (1) together with wiper arm on shaft.
Check/adjust contact angle of wiper arms to windshield.
Removing right wiper arm:
Remove caps (1).
RA Removing and installing both windshield wiper arms
BMW AG - TIS
03.02.2013 02:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -