5 Series E60 523i (N52K) SAL
Replacement:
Release screws (1).
Unclip tank filler flap Bowden cable (2) in direction of arrow from
servodrive for tank filler flap (3).
Remove servodrive for tank filler flap (3) from retaining
mount (4).
Installation:
Make sure clamp (5) is installed in correct position.
Carry out adjustment of servodrive for tank filler flap (3) via
elongated holes (6). It must be possible to lock or unlock the fuel
filler flap completely.
RA Removing and installing/replacing servodrive for tank filler flap
BMW AG - TIS
03.02.2013 04:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -