5 Series E60 523i (N52K) SAL
Automatic emergency call: If an accident exceeding a certain severity occurs, a crash message will be sent to
the TCU through a wire connection via the SGM (Safety and Gateway Module).
If option 605 "Basic fittings for telematics" is installed, the TCU will first try to establish a voice connection to
the service provider. In addition, an SMS text message will be sent to the service provider giving the coordinates
of the vehicle's location.
If no connection with the service provider can be established within 60 seconds, a standard emergency call will
be triggered from the mobile phone network.
The service provider will use the voice connection to try to gain more detailed information from the vehicle
occupants about
•
the severity of the accident,
•
the number of people injured,
•
the condition of the injured persons.
Rescue operations are initiated in accordance with the information obtained.
Breakdown call: A breakdown call is only possible if option 605 "Basic fittings for telematics" is installed and if
a breakdown recovery agreement has been concluded.
The CID
(Central Information Display) will then show "BMW breakdown recovery" in the "BMW Assist" menu.
Pressing the Controller will set up a telephone connection to the BMW Group Mobile Service and the following
data will be transmitted:
•
Vehicle location
•
Service data
Monitoring and recharging the battery in the bluetooth handset
The charge level of the battery in the bluetooth handset (e.g. lithium ion battery) is constantly monitored. If the
battery charge falls below a predefined level, the battery will automatically be recharged. [more ...]
Functions of the Central Information Display (CID) and Controller
The functions called up from the start menu with the Controller are:
-
Enter PIN code (Personal Identification Number)
-
Telephone
-
Short Message Service (SMS) text messaging
-
"BMW Assist"
-
Further functions, as described in the owner's handbook
Functions of the bluetooth handset
It is possible to carry out the following functions using the bluetooth handset:
-
All possibilities listed under "Functions" for the CID (Central Information Display) and Controller, except
"BMW Assist".
-
Further functions, as described in the owner's handbook.
Function sequences
A bluetooth handset paired to the Telematic Control Unit (TCU) is automatically detected in the bluetooth reception
area. After detection, the bluetooth radio connection is automatically established. [more ...]
Basic settings
SBT Car phone Professional E60
BMW AG - TIS
03.02.2013 17:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -