5 Series E60 523Li (N52) SAL
41 14 502
Replacing rear left outer wheel arch section
(rear left side panel removed)
Read contents of Body, General.
Refer to the description texts of the KSD CD (FRU
41 14 502) for details of stripping-down and rigging work.
Spot-weld bonding is used on the E60. Observe specific
procedure.
Following new body parts are required (refer to EPC):
-
(1) Wheel arch, outer, rear
-
(2) C-pillar, inner
Mark severance cut (1) in accordance with measurement and cut.
Important!
Cut outer metal sheet only.
Water drainage hose (2) of sunroof is located behind severance cut (1).
RA Replacing rear left outer wheel arch section (rear left side panel removed)
BMW AG - TIS
05.02.2013 23:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -