5 Series E60 523Li (N52) SAL
51 24 004
Adjusting rear lid lock (lower section of rear
lid lock)
Note:
Rear lid must be correctly adjusted to fit before adjustment of rear
lid lock.
If necessary
Adjust rear lid.
For ideal adjustment, refer to Body gap dimensions.
Screw in detent buffers for rear lid on left/right completely.
Check fulcrum pads on lower section of rear lid lock for damage
and replace if necessary.
Version with cover caps on rear apron trim:
If necessary, remove cover caps.
Slacken screws in lower section of rear lid lock until it is just able
to move and centres itself.
The lower section of the rear lid lock must not scrape against the
rear lid lock.
RA Adjusting rear lid lock (lower section of rear lid lock)
BMW AG - TIS
06.02.2013 01:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -