5 Series E60 523Li (N52) SAL
64 11 875
Removing and installing/replacing servodrive
for defrosting flap
Necessary preliminary tasks:
•
Remove trim panel for pedal assembly.
•
Remove air distributor in footwell and heating duct in rear
compartment on left.
Press lock (1) and pull out servodrive for defrosting flap (2) in
direction of arrow.
Unfasten plug connection (3) and disconnect.
Installation:
Follow repair instruction "Installing servodrive".
Servodrive for defrosting flap (2) must snap audibly into place.
RA Removing and installing/replacing servodrive for defrosting flap
BMW AG - TIS
06.02.2013 06:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -