5 Series E60 523Li (N52) SAL
Gently lever out impact absorber (1) with special tool
00 9 317
.
Unscrew nuts (2).
Installation:
Make sure impact absorber (1) is correctly seated.
Tightening torque 66 54 1AZ
.
Important!
Secure night vision camera (3) against falling down.
Release screw (1) and disengage tube (2) from mounting.
Tightening torque 66 54 1AZ
.
Remove night vision camera (3) complete with holder.
Important!
Secure night vision camera (1) against falling down.
Disconnect hose connection (2) and unclip cable fastener (3).
After installation:
•
Fill up with washer fluid
Replacement only:
•
Replace night vision camera
RA Remove and installing complete night vision camera (up to 03/2007)
BMW AG - TIS
06.02.2013 09:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -