5 Series E60 523Li (N52) SAL
67 66 013
Removing and installing/replacing drive unit
for lumbar support on left or right front seat
(active seat)
Cut through cable ties (1).
Set down drive unit for lumbar support (2) with jacket towards
bottom.
Cut through cable tie (1) on jacket of drive unit for lumbar
support (2).
Disconnect plug connection (3).
Detach hose (1) in direction of arrow.
Note:
If firmly seated, gently heat hose (1) on drive unit for lumbar
support (2).
Installation:
Make sure hose (1) is laid without kinks.
Remove drive unit for lumbar support (2).
Replacement:
Pull drive unit for lumbar support (2) out of jacket (3).
RA Removing and installing/replacing drive unit for lumbar support on left or right
BMW AG - TIS
06.02.2013 09:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -