5 Series E60 525d (M57T2) SAL
Unscrew conrod bearing cover.
Pull out connecting rod and piston to the cylinder head end.
Important!
Position crankshaft vertically.
Proceed with care at the cylinder wall and oil spray nozzles
Risk of damage.
Preliminary work:
Clamp special tool 11 6 111 in a vice.
Secure piston (1) with connecting rod to special tool 11 6 111 .
Warning!
Protective goggles must be worn for the next work step.
Warning!
Protective goggles must be worn.
Lever out piston circlip with special tool 11 4 492 in direction of
arrow.
Important!
Piston and gudgeon pin are matched to each other.
They must not be mixed up.
RA Removing and installing/replacing all pistons (M57T2)
BMW AG - TIS
09.02.2013 18:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
