5 Series E60 525d (M57T2) SAL
13 62 535
Replacing charge-air pressure sensor
(M57TU, M57T2)
Necessary preliminary tasks:
•
Read out fault memory of DDE control unit; if necessary, work
through test schedules
•
Switch off ignition
•
Remove acoustic cover
Unlock plug (1) and remove.
Remove charge-air pressure sensor (2) in direction of arrow.
Installation:
Replace sealing ring (1) on charge-air pressure sensor (2).
Installation:
Now clear the fault memory.
RA Replacing charge-air pressure sensor (M57TU, M57T2)
BMW AG - TIS
09.02.2013 20:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
