5 Series E60 525d (M57T2) SAL
Centre clutch plate (1) with special tool 21 2 270 .
Important!
Install clutch plate in correct position.
Note designation for "engine side" / "transmission side".
Handle clutch plate with care. Do not touch surfaces of friction
linings.
Fit clutch (1) to flywheel.
Tightening torque 21 21 1AZ
.
Important!
Clutch (1) must be secured by way of dowel pins (2).
Release spindle (1) until load is fully removed from diaphragm
spring (2)
Remove special tools 21 2 170 and 21 2 180 .
Withdraw special tool from clutch plate with aid of accompanying
screw (1).
RA Removing and installing/replacing clutch (SAC 240)
BMW AG - TIS
09.02.2013 21:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
