5 Series E60 525d (M57T2) SAL
Start engine and allow engine to idle in with selector lever in
P position.
Pour in 1 litre of ZF LifeGuardFluid One additive with special
tool 00 2 080 .
Screw in transmission filler plug.
Installation:
Tightening torque: 80 Nm.
Attach the notice sticker supplied with the bottle to the back of the
oil sump next to the fluid filler plug.
Then carry out a fluid level adjustment to exclude the possibility of
minimum filling.
RA Topping up fluid additive in event of friction coefficient fluctuations during g
BMW AG - TIS
09.02.2013 21:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -