5 Series E60 525d (M57T2) SAL
25 16 175
Adjusting interlock cable
Necessary preliminary tasks:
•
Remove centre console.
•
Remove trim (E85).
•
Remove switch unit (E85).
Move selector lever (1) to position "P" (front stop of shifting gate).
Loosen screw (4).
Tightening torque 25 16 5AZ
.
It must be possible to move cable (2) slightly in holder (3).
Move ignition key to "zero" position and remove.
Press interlock locking pawl (5) downwards as far as it will go.
Tighten screw (4).
Note:
Check adjustment of Interlock:
-
Turn ignition key to "ignition" position and then back to
"zero" position.
-
Interlock locking pawl (1) must rest (3) on contact face
in shift tower (2).
-
If necessary, adjust interlock cable again.
RA Adjusting interlock cable
BMW AG - TIS
09.02.2013 22:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -