5 Series E60 525d (M57T2) SAL
32 41 060
Removing and installing vane pump for power
steering (M57TU, M57T2)
Warning!
Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Recycling:
Catch and dispose of hydraulic fluid in a suitable container.
Observe country-specific waste-disposal regulations
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove acoustic cover
•
Remove belt pulley
•
Remove front underbody protection
Release hose clamp (1) and detach radiator return line from vane
pump.
Installation:
Markings on suction line and fluid reservoir connection must
match up.
Release banjo bolt (2) and detach pressure line from vane pump.
Installation:
Replace sealing ring.
RA Removing and installing vane pump for power steering (M57TU, M57T2)
BMW AG - TIS
09.02.2013 23:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -