5 Series E60 525d (M57T2) SAL
41 14 511
Replacing complete rear left wheel arch (rear
left side panel removed)
Read contents of Body, General.
Refer to the description texts of the KSD CD (FRU
41 14 511) for details of stripping-down and rigging work.
Spot-weld bonding is used on the E60. Observe specific
procedure.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Wheel arch, rear, inner half
-
(2) Wheel arch, outer, rear
-
(3) C-pillar, inner
-
(4) C-pillar, inner, top
Mark severance cut on side panel at rear in accordance with measurement a and cut.
Important!
Cut outer metal sheet only.
Water drainage hose (2) is located behind severance cut (1).
RA Replacing complete rear left wheel arch (rear left side panel removed)
BMW AG - TIS
10.02.2013 02:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
