Panel Removal and Installation for BMW 5 Series E60 with M57T2 Engine
51 71 447
Removing and installing or replacing panel
for cover on left or right side member
Necessary preliminary tasks:
•
Detach wheel arch cover from front/rear side member cover
Release screws (1).
Unclip rear panel (1) from holder (3).
Unclip panel (1) at holders (2) and remove in direction of arrow.
Installation:
Catches (1) on holder (2) must not be damaged.
RA Removing and installing or replacing panel for cover on left or right side membe
BMW AG - TIS
10.02.2013 05:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
