5 Series E60 525d (M57T2) SAL
52 14 060
Removing and installing/replacing valve
housing for left or right front lumbar support
(normal/electric)
Necessary preliminary tasks:
•
Remove rear panel on front seat backrest
Release retaining screw (1).
Disconnect electrical plug connection.
Disconnect air hoses (1) and (2).
Installation:
Make sure air hoses (2) are correctly connected to valve block
(color coding: red/blue).
Housing on valve block must not be unclipped (leakage). If
necessary, clip housing together.
RA Removing and installing/replacing valve housing for left or right front lumbar s
BMW AG - TIS
10.02.2013 06:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
