bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

18 RA Removing And Installing_replacing Head Restraint Mount On Left Or Right Front Se > < 16 RA Removing And Installing_replacing Valve Housing For Left Or Right Front Lumbar S
Page 1
background image

52 14 198

Removing and installing / replacing rear panel
on left or right front seat backrest (normal /
electric)

Operation is shown on the left seat. When removing from the right
seat, transpose the pull and striking sides accordingly.

1. 

Grip between rear panel and backrest cover on door side

until clip can be felt (do not pull).

2. 

At same time, firmly punch towards middle of seat on inner

side (tunnel side) at top.

Upper retainers spring out of seat guide.

3. 

Pull rear panel up out of lower guides.

Installation:

Rear panel and clips must not be damaged.

1

Upper clips

2

Lower clips

RA  Removing and installing / replacing rear panel on left or right front seat backr

BMW AG - TIS

10.02.2013  06:16

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

18 RA Removing And Installing_replacing Head Restraint Mount On Left Or Right Front Se > < 16 RA Removing And Installing_replacing Valve Housing For Left Or Right Front Lumbar S