5 Series E60 525d (M57TU) SAL
11 12 000
Removing and installing, sealing/replacing
cylinder head cover (M57TU)
Necessary preliminary tasks:
•
Remove fan with fan cowl.
•
Remove acoustic cover.
•
Remove air cleaner.
•
Remove center of front wall.
•
Remove intake air manifold.
•
Remove all injectors.
•
Caution!
Protect alternator against engine oil.
Cover alternator with suitable apparatus (risk of damage).
Fit charge air hoses without grease and dry.
Release screws (1).
Remove suction pipe in direction of arrow.
Note:
Illustrations show M57.
Release all screws (arrows).
Release bolts (1) from outside to inside.
Remove cylinder head cover (3).
Installation:
First tighten bolts (1) from inside to outside.
Tighten down outer bolts diagonally and evenly.
RA Removing and installing, sealing/replacing cylinder head cover (M57TU)
BMW AG - TIS
11.02.2013 11:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
