5 Series E60 525d (M57TU) SAL
11 12 100
Removing and installing cylinder head
(M57TU)
Special tools required:
•
00 9 120
•
11 6 050
Necessary preliminary tasks:
•
Instructions for disconnecting and connecting battery.
•
Disconnect battery negative terminal.
•
Remove cylinder head cover.
•
Drain coolant.
•
Remove compressor drive belt.
•
Remove alternator drive belt.
•
Remove vacuum pump.
•
Remove camshafts.
Important!
Fit new cylinder head screws.
Do not wash off bolt coating.
There must be no oil or coolant in the pocket holes (risk of
cracking).
Protect alternator against engine oil and coolant. (Risk of
damage).
Cover alternator with suitable apparatus.
Assemble charge air hoses without grease and dry.
RA Removing and installing cylinder head (M57TU)
BMW AG - TIS
11.02.2013 11:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
