5 Series E60 525d (M57TU) SAL
11 13 000
Removing and installing, sealing or replacing
oil sump (M57TU)
Special tools required:
•
00 0 200
•
00 0 201
•
00 0 202
•
00 0 204
•
00 0 208
Necessary preliminary tasks:
•
Remove acoustic cover.
•
Remove radiator cowl.
•
Remove engine underguard at front/rear.
•
Drain engine oil.
•
Lower front axle support.
Note:
There is no need to perform a front axle alignment check.
Remove screw (1) on left/right.
Assemble special tool 00 0 200 with special tools 00 0 201 /
00 0 202 / 00 0 204 / 00 0 208 and fit.
Suspend special tool 00 0 200 from front and rear engine
suspension.
Contacts (1) must rest on screws of side walls.
Important!
Do not exceed lifting height under any circumstances.
Raise engine max. 20-25 mm.
Illustrations show E60.
RA Removing and installing, sealing or replacing oil sump (M57TU)
BMW AG - TIS
11.02.2013 11:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -