5 Series E60 525d (M57TU) SAL
Illustrations show M47TU.
Note:
Store the support bushing (1) of the new radial seal version
as a "special tool".
The old and new radial seal versions can be installed with the
support bushing (1).
Make sure dowel sleeves (1) are correctly seated.
Note:
Illustration shows connected segment gear.
Note:
The end cover is supplied in the set with a built-in radial seal
and a support bushing. The support bushing is fitted on the
radial seal (to provide protection during transportation and
storage).
Assemble engine.
Check engine for leaks.
RA Replacing crankshaft seal (M57TU)
BMW AG - TIS
11.02.2013 11:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -