5 Series E60 525d (M57TU) SAL
Hold crankshaft in TDC position with special tool 11 5 180 .
Important!
Do not turn the engine back.
Special tool 11 5 180 must be removed before engine is
started.
Fit special tool 11 6 321 on inlet camshaft (1).
Note:
Special tool 11 6 321 must lie flush on cylinder head.
For a better overview, this work step is shown without the vacuum
pump.
Fit special tool 11 6 321 on exhaust camshaft (1).
Note:
Special tool 11 6 321 must lie flush on cylinder head.
If necessary, adjust camshaft timing.
Assemble engine.
RA Checking camshaft timing (M57TU2)
BMW AG - TIS
11.02.2013 11:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
