5 Series E60 525d (M57TU) SAL
Release screw for cable retaining (1).
Release mounting (2).
Release screws (3).
Installation:
Tightening torque, 12 52 8AZ
.
Release retaining clips (1).
To release plug connection, position control unit vertically.
Detach connector strip (3) towards top.
Disconnect plug connections (1 to 13).
Installation:
Make sure profile seals (7 and 8) are installed in correct position.
Check for water leaks.
Release lock (1) in direction of arrow.
Press out black plug (2) in chamber A.
Press out white plug (3) in chamber B.
RA Replacing wiring harness section for engine (M57TU)
BMW AG - TIS
11.02.2013 12:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
