5 Series E60 525d (M57TU) SAL
12 51 200
Replacing wiring harness section for injectors
(M57TU)
Necessary preliminary tasks:
•
Remove acoustic cover.
•
Remove right fresh air duct.
•
Remove tension strut.
•
Remove electronics box cover.
Disconnect plug (1) at injectors.
Loosen screws (2).
Remove cable duct (3) from mounting towards top.
Release retaining clip (1).
To release plug connection, position control unit (2) vertically.
Disconnect control unit plug (9).
RA Replacing wiring harness section for injectors (M57TU)
BMW AG - TIS
11.02.2013 12:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
