5 Series E60 525d (M57TU) SAL
Important!
After disconnecting the pressure line, it is absolutely essential
to seal the openings in the high-pressure pump and the high-
pressure accumulator with protective caps.
Recycling:
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Release union nuts (1) on pressure line with special tool
13 5 020 .
Tightening torque 13 53 8AZ
.
Pull off plug (2).
Remove rubber mount (3).
Installation:
Observe installation position of rubber mount (3).
RA Replacing pressure line (between high-pressure pump and pressure accumulator) (M
BMW AG - TIS
11.02.2013 12:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
