5 Series E60 525d (M57TU) SAL
E60/61 only - note:
For SA DynamicDrive.
Release nut and remove hydraulic hose (1) with holder from
mounting.
Pull spring clamp (1) downwards.
Remove heat exchanger (3).
Unlock hydraulic lines (1 and 2) on heat exchanger (3) with
special tool 17 0 030 and disconnect.
Installation:
Connect hydraulic line (2) with TOP marking to upper pipe of
heat exchanger.
Note:
Illustrations show N62.
Important!
Check fluid level in automatic transmission,
refer to Maintenance and General Information, Main Group
00.
RA Removing and installing/replacing heat exchanger for automatic transmission (N62
BMW AG - TIS
11.02.2013 13:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
