5 Series E60 525d (M57TU) SAL
24 11 010
Removing and installing/sealing or replacing
transmission sump (GA6HP26Z/6HP32Z)
Important!
Remove transmission sump only after it has cooled down.
After completion of work, check transmission fluid level.
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
E65 only:
Release screws.
Remove transmission underguard (1).
E60/E61/E63/E64 only:
Remove underbody protection.
If necessary, remove exhaust system bracket (N62/N62TU/M57T2
only).
E90/E91/E92 only
Remove rear underbody protection.
If necessary, remove bracket for underbody protection.
Remove oil drain plug (1).
Tightening torque: 24 11 6AZ.
Drain automatic transmission fluid.
Installation:
Replace oil drain plug.
RA Removing and installing/sealing or replacing transmission sump (GA6HP26Z/6HP32Z)
BMW AG - TIS
11.02.2013 14:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
