5 Series E60 525d (M57TU) SAL
Remove front underbody protection.
Remove steering gear cover at side.
Expose pressure line up to connection on power steering gear.
Release banjo bolt and disconnect pressure line.
Installation:
Replace all sealing rings.
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 3AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing pressure line for power steering (M47T2, M57TU, M57T2)
BMW AG - TIS
11.02.2013 16:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -