5 Series E60 525d (M57TU) SAL
Expose return line up to connection on power steering gear.
Release banjo bolt and disconnect return line.
Installation:
Replace sealing rings.
Make sure hydraulic line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 3AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing return line for power steering (M47T2, M57TU, M57T2)
BMW AG - TIS
11.02.2013 16:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
