5 Series E60 525d (M57TU) SAL
32 41 033
Removing and installing power steering pump
for power steering gear with active front
steering (M57TU, M57T2)
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off pipe connections with plugs.
Necessary preliminary tasks:
•
Draw off and dispose off hydraulic fluid from fluid reservoir
•
Remove acoustic cover
•
Relieve tension on drive belt and remove from power steering
pump belt pulley
Release banjo bolt (1) and detach pressure line from power
steering pump.
Installation:
Replace sealing rings (D).
Make sure hydraulic lines are laid without tension and with
sufficient spacing to adjoining components.
Tightening torque 32 41 3AZ
.
Release hose clamp (2) and detach suction line from power
steering pump.
Disconnect plug connection (3).
RA Removing and installing power steering pump for power steering gear with active
BMW AG - TIS
11.02.2013 16:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
