5 Series E60 525d (M57TU) SAL
34 21 200
Removing and installing or replacing brake
linings on both rear disc brakes
Special tools required:
•
34 1 050
•
34 1 080
•
34 1 280
Important!
The brake pad wear sensor must be replaced once it has
been removed (brake pad wear sensor loses its retention
capability in the brake pad).
Necessary preliminary tasks:
•
Remove wheels
•
Remove brake pad wear sensor
Observe safety instructions on raising the vehicle.
Remove plastic plugs (1).
Right side:
Disconnect plug connection for brake lining wear sensor.
RA Removing and installing or replacing brake linings on both rear disc brakes
BMW AG - TIS
11.02.2013 17:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
