5 Series E60 525d (M57TU) SAL
Important!
Do not mix up brake pipes (mark if necessary).
Close off connection bores with plugs.
Disconnect plug connection (1).
Detach vacuum lines (2) from vacuum tank.
Important!
Do not bend brake lines.
Unfasten brake lines (3).
Installation:
Tightening torque 34 32 1AZ
.
Release screw (4) and remove hydraulic unit.
When replacing hydraulic unit:
Release screws (1) and convert holder (2).
Note:
Vacuum tank is converted completely with holder.
RA Removing and installing/replacing hydraulic unit for DSC (M57 / M57T2 / M47T2)
BMW AG - TIS
11.02.2013 17:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
