5 Series E60 525d (M57TU) SAL
37 13 110
Removing and installing/replacing pressure
line for oscillating motor/rear axle
Remove front pressure lines (1) (from valve block to junction I
on vehicle underbody)
Remove middle pressure lines (2) (from junction I to junction III
on vehicle underbody)
Remove rear pressure lines (3) (from junction III on vehicle
underbody to oscillating motor)
RA Removing and installing/replacing pressure line for oscillating motor/rear axle
BMW AG - TIS
11.02.2013 18:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
