5 Series E60 525d (M57TU) SAL
41 35 101
Replacing rear left side panel (partial
replacement, longitudinal member cover
before B-pillar)
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 35 101).
Spot-weld bonding is used on this vehicle. Observe specific
procedure.
Use only approved spot-welding apparatus for repairs!
Following new body parts are required (refer to Electronic Parts
Catalogue ETK):
-
(1) Side panel, rear
-
(2) Attachment, entrance, outer
-
(3) Shaped part, entrance, rear (not shown)
Mark severance cut (1) at outer entrance attachment (2) in
accordance with measurement a and cut.
Measurement a = approx. 60 mm behind hole dia. 15 mm.
Open weld joints on outer entrance attachment (2) and remove
component.
Installation:
Weld in reinforcement plate at severance cut (1).
RA Replacing rear left side panel (partial replacement, longitudinal member cover b
BMW AG - TIS
11.02.2013 18:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -